Rolling Machine:
Technical Description of FeltCrafts Rolling Machine Item No. 1007
This is a rolling machine for producing felt from carded wool or other animal fibers by wetting the fibers placed on a rolling mat and rolling the mat in the machine.
The Speed of the machine varies from zero to 180 RPM.
The crated weight of the 60 inch roller length machine is approximately 165 pounds (75 kilos)
There are:
- 3 – 4 inch PVC rollers
- 1 motor
- 1 speed control
- 3 belts
- 6 bearings
- 4 sheaves
Needle felting machines:
Technical Description of FeltCrafts Table Top Needle Felting Machines
Item Numbers. 2036, 2048, 2060 (36 inch , 48 inch and 60 inch working areas)
This is a needle felting machine for producing felt from carded wool or other fibers. The fibers are arranged on the ramp and the front roller pulls them into the needle felting area then the back roller pulls them out of the machine. The machine is wired for the country it is going to. The machine is fully assembled.
The speed of the machine varies from zero to 180 RPM.
The Crated weight of the 36 inch needle felting machine is approximately 180 pounds.
CRATE dimensions: 55” x 17” x 26”
The crated weight of the 48 inch needle felting machine is approx. 240 pounds.
CRATE dimensions: 67” x 17” x 26”
The crated weight of the 60 inch needle felting machine is approx. 275 pounds.
CRATE dimensions: 79” x 17” x 26”
Each machine has:
- 2 rollers
- 2 energy efficient DC motors
- 2 speed controls
- A forward and reverse switch for the rollers
- Emergency stop switch for needles
- Two top roller bars for front and back of the machine
- 1 belt
- 4 roller bearings
- 2 flange bearings
- 3 sheaves
- 1 clear acrylic ramp – size varies with machine size
- 1 clear acrylic needle guard – size varies with machine size (optional)
FeltCrafts Machines 